The materials needed to make INCENSE:
1. Trunk / Stick
Material main stem of bamboo / bamboo chatting, etc. ori. Bamboo is cut to size as follows favorite 22cm, 29cm, 32cm, 38cm and 42cm.Diameter local incense 1.5 - 2mm box, incense was imported 1mm round. The central rod making this much got in rural areas seek, Mountain landscape, handicrafts, etc. eBook. Manufacturing is still using the manual method. The construction is also in line with the activity in the fields, planting season, looking for grass. Fluctuations in the stock shaft is very high.
2. Sawdust
sawdust serves as a filler / meat, usually of wood that had high levels of violence such as teak, etc. bingjerai. The finer the powder can produce good quality incense.
3. Powder sticky
powder serves to put sawdust on the trunk. People used to call fundamental. Pollen sticks to the bottom of batangharus strong. This sticky powder derived from wood sintok, skin rant, cassia. The powder can be mixed with water if the issue is a very strong adhesive. There is a white and brown.
4. Water
serves as a means of putting sticky powder apad rod.
5. Shell powder
powder material to help stiffen the surface of the incense to be more subtle and not wavy.The color is dark brown over beautify the appearance of incense.
6. Calcium
is an adjuvant helps the process of burning incense. Abu produced by wearing a white calcium can.
7. Caustic soda
adjuvant is added in Tong water. Its function is to assist the combustion process meningaktakan meat and incense sticks well and not easily extinguished embers.
8. Perfume
fragrance materials consist of chemicals and dyes. The chemicals used are generally aromatic jasmine, sandal wood, lavender, lotus. While the nature of sandalwood, vetiver, sandalwood, etc.
9. Plastic
materials as packing material by the small size suitable consumer consumption
10. Dye
No comments:
Post a Comment