For those of you who are involved in the world of timber, must be very important for you to know how to calculate cubication wood. Cubication wood itself is the value of the amount of volume that is on the wood, and the value of the unit using cubic meters (M3).By knowing the value of a wood cubication, then we can also interpret or know the price of wood is based on the value kubikasinya.
The method used to calculate cubication on logs or logs of wood is different in a way to calculate cubication sawn wood or wood that has been shaped board. This is because physically between the two different forms. So each has its own formula for calculating the value of kubikasinya.
For how to calculate cubication logs or logs
formula used is (P x D x D x 0.7854): 10,000 = value cubication
Specification:
how to calculate the wood cubication P is the length of wood that is expressed in meters
D is the diameter of the timber which is expressed in units of cm
Case in point: If someone is going to buy a timber that is still in the form of logs with a diameter of 25 cm and a length of 2 meters then, if using the above formula, the value cubication contained in the timber is (2 x 25 x 25 x 0.7854): 10,000 = 0.098175 M3.
Thus, the value of cubication on a wooden logs to be acquired by such person, or nearly one-tenth of 0.098175 cubic.
Nb: wood cubication value obtained by using this formula is almost the same (slightly lower) with the value of existing timber cubication cubication table logs forestry. Or if you do not want tired calculate by using the formula, you can look directly at the table in the table cubication owned forestry forestry.
As for the formula or calculating cubication sawn timber or board
formula used is (T x L x P): 10,000 = value cubication
Specification:
T is thick wooden board expressed in units of cm
L is the width of a wooden board which is calculated in units of cm
P is the length of a wooden board which is calculated in meters
Case in point: on a wooden board with a size of 4 cm thick, 25 cm wide and 2 meters long, then the amount of cubication on the wooden board when using the above formula is (4 x 25 x 2): 10,000 = 0.02 M3 or need 50 planks to reach one cubic.
Ways of calculating cubication wood on not only for certain types of wood but can be applied to all types of commercial wood, such as teak, Falcata, Mindi wood, mahogany etc.
No comments:
Post a Comment